News

1   2   3   4   5   6   7   8  

Shale Drilling Up as OPEC Cuts Keep Oil above $50

Bloomberg (Lipschultz Feb. 17, 2017)
Tuesday, February 21, 2017

Drillers have added 72 rigs since 2017 began, the best start in five years. The expansion is spreading in Texas and Oklahoma, with the Granite Wash play leading the increase. Shale wildcatters pushed ahead on the biggest surge in U.S. oil drilling since 2012 as the explorers take advantage of prices above $50 for more than two months.

Rigs targeting crude in the U.S. rose by 6 to 597 this week, the highest total since October 2015, according to Baker Hughes Inc. data reported Friday. Drillers have added 72 rigs since 2017 began, the best start in five years. The expansion is spreading . . .


EIA: US Shale Oil Output To Rise In March By 80,000 BPD.

Ruters 2/13 (Reporting by Catherine Ngai; Editing by Marguerita Choy and Leslie Adler)
Tuesday, February 14, 2017

Reuters (2/13) reports the US Energy Information Administration’s drilling productivity report shows that March oil production “is forecast to rise by 79,000 barrels per day to 4.87 million bpd,” which would be the biggest monthly rise since October. In the Permian shale play of West Texas and New Mexico, output “is forecast to rise by more than 70,000 bpd to 2.25 million bpd, in what would be the biggest monthly rise since January 2016.” Meanwhile, Eagle Ford production in Texas “is expected to rise by 14,000 bpd to 1.08 million bpd, the first monthly increase since December 2015, EIA data sh . . .


Total Rig Count Increases 12 To 741

2/10, Jamerson, Subscription Publication The Wall Street Journal (Ruters and Fuel Fix also reported)
Monday, February 13, 2017

The Wall Street Journal (2/10, Jamerson, Subscription Publication) reports Baker Hughes said that the number of oil rigs drilling in the US increased by 8 last week, bringing the total to 591. The gas rig count increased by 4 to 149, while offshore rigs fell by 1 to 21. Reuters (2/10, DiSavino) reports the data shows the average rate of rig additions over the past four weeks increased to 17, the highest rate since February 2012. Raymond James said in a note that it expects the combined oil and natural gas rig count to be 850 in 2017. Fuel Fix (TX) (2/10) reports the Permian Basin led the incre . . .


Houston equity firm's company makes acquisition

By Mike D. Smith Published 3:09 pm, Thursday, January 5, 2017
Friday, January 6, 2017

A global trailer running gear and chassis assembly company that is majority-owned by a Houston private equity firm has acquired two vehicle components manufacturers. Dexter -- part of DexKo Global -- has acquired Ingersoll Axles' assets that build heavy duty axles and suspension systems. The company also has acquired light duty manufacturer Standen. Ingersoll Axles and Standen will be merged into one company and operate as a subsidiary of Dexter. Dexter plans to acquire Ingersoll Axles' manufacturing locations in Ontario, Alberta and Indianapolis. Houston-based The Sterling Group owns a maj . . .


New Mitsubishi Caterpillar Forklift manufacturing facility to begin construction

Houston Business Journal Jan 5, 2017, 8:56am CST
Friday, January 6, 2017

Houston-based Mitsubishi Caterpillar Forklift America Inc. is preparing to build another Houston-area facility.

Construction is slated to begin immediately on a 71,000-square-foot manufacturing facility and distribution center on 10 acres in the Conroe Industrial Park, according to a release. The facility is part of a joint venture between MCFA and Hamburg, Germany-based Jungheinrich AG, a material handling equipment company. Financial details were not disclosed, but Ruston, Louisiana-based Origin Bank provided financing for the project.

Houston-based Archway Properties is the . . .


Jan 3rd Stock Report

Stock Prices In Relation To Previous Day’s Adjusted Close
Tuesday, January 3, 2017

Stock Prices In Relation To Previous Day’s Adjusted Close DJIA 19,762.60 - 0.29% S&P 500 2,238.83 - 0.46% Nasdaq 5,383.12 - 0.90% Gold $1,157.80 + 6.10 Silver $16.14 + 0.15 COMEX Copper $254.25 + 3.70 Platinum Spot $912.21 + 9.11 Zinc $2,576.00 + 54.00 Tin $21,125.00 + 75.00 Natural Gas $3.49 - 0.23 Crude Oil $57.15 + 0.33 LME 3 Month Aluminum $1,693.00 + 14.00


1   2   3   4   5   6   7   8  
HTEC Terms and Conditions
x
es fr pt


Terms and Conditions

www.HTECNetwork.org

Your access and use of the Haas Automation - HTEC Network website (the "Site") (www.HTECNetwork.org) is subject to the following terms and conditions ("Terms and Conditions") and all applicable laws. By accessing and browsing the Site, you accept, without limitation or qualification, the Terms and Conditions and acknowledge that any other agreements between you and Haas Automation, Incorporated are superseded and are of no force or effect.

1. You should assume, unless otherwise noted, that everything you see or read on the Site is copyrighted and may not be used, except as provided in these Terms and Conditions or in the text on the Site, without the written permission of Haas Automation, Incorporated. Haas Automation, Incorporated neither warrants nor represents that your use of materials displayed on the Site will not infringe rights of third parties not owned by or affiliated with Haas Automation, Incorporated.

2. While Haas Automation, Incorporated uses reasonable efforts to include accurate and up to date information on the Site, Haas Automation, Incorporated makes no warranties or representations as to its accuracy. Haas Automation, Incorporated assumes no liability or responsibility for any errors or omissions in the content on the Site.

3. Your use and browsing of the Site is at your risk. Neither Haas Automation, Incorporated nor any other party involved in creating, producing, or delivering the Site is liable for any direct, incidental, consequential, indirect, or punitive damages arising out of your access to, or use of, the Site. Without limiting the foregoing, everything on the Site is provided to you "As Is," without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, or non infringement. Please note that some jurisdictions may not allow the exclusion of implied warranties, so some of the above inclusions may not apply to you. Check your local laws for any restrictions or limitations regarding the exclusion of implied warranties. Haas Automation, Incorporated also assumes no responsibility, and shall not be liable for any damages due to computer viruses that may infect your computer equipment or other property on account of your access to, use of, or browsing in the Site, or your downloading of any materials, data, text, images, video, or audio from the Site.

4. Any communication or material you transmit to the Site by electronic mail or otherwise, including any data, questions, comments, suggestions, or the like, is and will be treated as non confidential and non proprietary. Anything you transmit or post may be used by Haas Automation, Incorporated or its affiliates for any purpose, including but not limited to reproduction, disclosure, transmission, publication, broadcast, and posting. Furthermore, Haas Automation, Incorporated is free to use any ideas, concepts, knowhow, or techniques contained in any communications you send to the Site for any purpose whatsoever, including but not limited to developing, manufacturing, and marketing products using such information. Images of people or places displayed on the Site are either the property of or used with permission by Haas Automation, Incorporated. The use of these images by you, or anyone else authorized by you, is prohibited unless specifically permitted by these Terms and Conditions or specific permission provided elsewhere on the Site. Any unauthorized use of the images may violate copyright laws, trademark laws, the laws of privacy and publicity, and communications regulations and statutes.

5. Unless otherwise noted, the trademarks, logos, and service marks (collectively the "Trademarks") displayed on the Site are registered Trademarks of Haas Automation, Incorporated. Nothing contained on the Site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any Trademark displayed on the Site without the written permission of Haas Automation, Incorporated or such third party that may own any Trademarks displayed on the Site. Your misuse of the Trademarks displayed on the Site, or any other content of the Site, except as provided in these Terms and Conditions, is strictly prohibited. You are also advised that Haas Automation, Incorporated will aggressively enforce its intellectual property rights to the fullest extent of the law, including the seeking of criminal prosecution.

6. Haas Automation, Incorporated has not reviewed all of the sites linked to this Site (if any) and is not responsible for the contents of any off Site page or any other sites linked to this Site. Your linking to any other off Site pages or other sites is at your own risk. Although Haas Automation, Incorporated may from time to time monitor or review discussions, chats, postings, transmissions, bulletins boards, and the like that may appear on the Site, Haas Automation, Incorporated is under no obligation to do so and assumes no responsibility or liability arising from the content of any such locations, nor for any error, defamation, libel, slander, omission, falsehood, obscenity, pornography, profanity, danger, or inaccuracy in any information contained within such locations on the Site. You are prohibited from posting or transmitting any unlawful, threatening, libelous, defamatory, obscene, scandalous, inflammatory, pornographic, or profane material or any material that could constitute or encourage conduct that would be considered a criminal offense, give rise to civil liability, or otherwise violate any law. Haas Automation, Incorporated will fully cooperate with any law enforcement authorities or court order requesting or directing Haas Automation, Incorporated to disclose the identity of anyone posting any such information or materials.

7. Haas Automation, Incorporated may at any time revise these Terms and Conditions by updating this posting. You are bound by any such revisions and should therefore periodically visit this page to review the then current Terms and Conditions to which you are bound.

(or press ESC or click the overlay)